Description

The Remix has two light sources to choose from, three Ultrabright LEDs or a Maxbright LED. Each light source has two modes (High and Low).

To switch between light sources, press and hold the button down until the light source switches to the desired source. As soon as it switches release the button.

NOTE: If you keep the button pressed the light will continue to switch back and forth between the 5mm and Maxbright LED (on low light settings) until you release the button.

Once you have found your desired light source, you now can select different brightness levels. Your light will start on “low output”. To change to “high output” you must press the button again in less then 1.6 seconds from the previous press.
Any additional delay will cause the light to turn off after the next button press.

One final note about the light function – If you have the light turned on, (and more than 1.6 seconds has passed since your last button press) and you press and hold the button down to switch light sources, you will be in darkness for about one second as the light sees this press as a signal to turn the light off and switch to the other light source simultaneously.