All poles are two-piece and feature a unique top shaft that can be custom sized by the user resulting in an overall pole length ranging from 11 1/2' to 15'. An epoxy kit is provided with each unit and no cutting is necessary. Simply telescope the top shaft to the desired length and epoxy in place. A non-corrosive joining sleeve is standard to allow disassembly of the top shaft from the float for easy storage. Flag not included (see below).
#SOP25 OP 120/150 (pictured top) Part No: 202018 Incorporates a special bright orange float which is made of a high impact, polyethylene jacket filled with closed-cell polyurethane foam. The float is slotted on the OP 120/150 model so it easily fits close to the backstay or life lines. For use with the HD-1. 8 lbs.
Butt to Top of Float
Top Half Min.
Top Half Max.
Overall Length Min.
Overall Length Max.
#SOPST OPST (pictured left) Part No: 202019 - *** OPST NO
LONGER AVAILABLE *** Functionally the same as OP 120/150 overboard pole, the OPST is designed for boats with stern tubes. Outside diameter of float is 3.25". 8 lbs.