Home > Navigation > Electronics > GearKeeper Gadget Security Tether

GearKeeper Gadget
Security Tether


This security tether allows full use of your cell phone or PLB while securely attached to your belt, pants or purse, preventing loss and damage. Ideal for very active people or those who spend time around water. The low force tether can easily be detached from the Gear Keeper for extended talk times or when it's not needed.

RT2-5450 Phone Keeper™ Security Tether
Belt Mount - $21.99

Ideal for short duration, frequent cell phone use

RT4-5450 Phone Keeper™ Ratcheting Gear Lock
Belt Mount - $21.99

NEW Ratcheting lock system allows easy phone use without line tension. A simple tug on the device releases the lock and retracts the line.

Ideal for longer phone or PDA use

Specifications

item1

  • Nylon Coated Stainless Steel Cable
  • Stainless Steel Spring and Hardware
  • 60 lbs. Breaking Strength

item5

Rotating Belt Clip Mount
Stainless steel belt clip easily and securely attaches to belts (up to 2”), pants or purse.

The Low Force Mini Gear Keeper® is not intended to retract phone, but prevents it from hitting ground, becoming lost or damaged.
Works in conjunction with each cell phone’s mounting system.

Quick Connect Q/C

  • Quickly and easily disconnect phone from Gear Keeper retractor.
  • Included Accessories:
    Q/C Lanyard with 3/8" Split Ring ACO-0903
    Nokia®-style adapter, Adhesive Pad Attachment
  • See Other Available Accessories

Option 1: Phone with Integrated Lanyard Loop

  • Slip string of lanyard (enclosed) through lanyard loop on phone.
  • Pass male end of lanyard through string loop; then cinch tight on phone.

Option 2: Phone with Leather Case

  • Slip string of lanyard (enclosed) through split ring on leather case.
  • Pass male end of lanyard through string loop; then cinch tight on split ring

Option 3: Phone with no connection point—use Adhesive Pad Eye

  • Remove backing from one side of Adhesive Patch and apply the patch to back of the Pad Eye.
  • Select location on phone back that is flat and does not interfere with holstering system (If Pad Eye is too large for your spot, it can be cut at one or both indentations with scissors)
  • For best results, clean phone surface with alcohol. Then remove remaining backing from Pad Eye and adhere to phone surface.
    Allow 2 hours to set.
  • Slip string of lanyard (enclosed) through hole on Pad Eye.
  • Pass male end of lanyard through string loop; then cinch tight on Pad Eye.




GearKeeper Gadget Security Tether
#NGK----- $21.99
Model: