Landfall Navigation - Where safe voyages begin.
800-941-2219





Home > Safety > Damage Control > Hydraulic Rigging Cutters



Emergency Hydraulic Rigging Cutters


Dismasting at sea is like hari-kiri for your boat unless you can clear the decks quickly to avoid holing. The difference between jury-rigging your "mother ship" or having to abandon it altogether can be a matter of minutes in a dismasting. Trouble is, your rigging was designed for ultimate strength and staying power, so getting free of the tangle before irreparable damage is done by the downed mast means that you've got to have the right tools on hand.

Hard experience shows that hacksaws, bolt and chain cutters don't cut it. Hydraulic rigging cutters, however, cut the time down to seconds per shroud or stay. Even injured, dazed, or diminutive crew can handle these powerful tools. These cutters deliver tons of cutting force and are capable of slicing cable, wire rope, soft steel bolts, CU & AL wire, & ACSR. They will also cut rebar, ground & anchor rod, and standard guy wire. Our rescue equipment is designed to be used to cut away the rig in an emergency.
It is not recommended for continuous industrial use on a daily basis.




Click to enlargeHolmatro EWC14H Wire Cutter
max. cutting size 16 mm
max. cutting size 0.55 inch
max. cutting opening 16 mm
max. cutting opening 0.63 inch
weight 2.8 kg
weight 6.2 lb
For wire rigging up to 0.63 inch


#SEWC14HList Price $1,850.00Only $1,395.00



Click to enlargeLocoloc HC-16PL Hydraulic Cable Cutter
5/8, 4.4 Ton Hydraulic Cable Cutter, Nickle Plated

The HC-16PL is a saltwater resistant, nickel-plated cutter for use in underwater environment. Its recommended uses include: marine nautical cutting, emergency cutting of stainless steel wire rope rigging and hardware, underwater rebar and cable cutting, and yacht mast rod cutting up to 1/2".

Requires minimum pumping effort to produce specified output tonnage. Portable , lightweight, and made to last years under the toughest field conditions.

A flip-top latch opens the tool jaw to easily accept cables and wires. The head can be rotated up to 180 to facilitate easy wire positioning and operator leverage.


Output: 4.4 Ton
Length: 16"
Weight: 6 lbs.
Jaw Opening: .75"
Plating: Nickel
Wire Rope: 16 mm, 5/8"
Soft Steel Bolts: 17 mm , 11/16"
Rebar, Ground & Anchor Rod: 13 mm , 1/2"
Standard Guy Wire: 13 mm , 1/2"


#SRHC-16PL$1,495.00



Click to enlargeHolmatro ERC12H Rod Cutter
max. cutting size 7.1 mm
max. cutting size -12 rod
max. cutting opening 9 mm
max. cutting opening 0.35 inch
weight 2.8 kg
weight 6.2 lb
For Rod rigging up to -12


#SERC12H



Click to enlargeHolmatro ERC30H Rod Cutter
max. cutting size 11.1 mm
max. cutting size -30 rod
max. cutting opening 12 mm
max. cutting opening 0.47 inch
weight 4.9 kg
weight 10.8 lb
For Rod rigging up to -30


#SERC30H



Click to enlargeHolmatro ERC30C Battery Operated Rod Cutter
Max. Cutting Size (Dyform) 11.1 mm
Max. Cutting Size (Rod) -30 rod
Max. Cutting Opening 12 mm
Weight 5.9 kg
Battery 18 V
Charger 12 V DC
For Rod rigging up to -30


#SERC30C



Click to enlargeHolmatro ERC30R Remote Rod Cutter
Max. Cutting Size (Rod -30) 11.1 mm
Max. Cutting Opening 12 mm
Hose Length 3 meter
Weight 3.1 kg
Manual Pump HTW650


#SERC30R



Click to enlargeHolmatro ERC60R Remote Rod Cutter
Max. Cutting Size (Rod -60) 16.8 mm
Max. Cutting Opening 17 mm
Hose Length 3 meter
Weight 6.6 kg
Manual Pump HTW650


#SERC60R



Click to enlargeHolmatro ERC115R Remote Rod Cutter
Max. Cutting Size (Rod -115) 22.2 mm
Max. Cutting Opening 24 mm
Hose Length 3 meter
Weight 15.8 kg
Manual Pump HTW650


#SERC115R




Check out our Clearance ShelfCheck out our Clearance ShelfClearance Sale
discounted items, take a LOOK.


New Clearance Gifts Promotions